DRM1062 - Industrial 6+2 Port Managed PoE Gigabit Ethernet Switch

In stock
  • Provide 6 Gigabit Copper Ports + 2 Gigabit Fiber Ports
  • IEEE 802.3at 30W (2-pair) High Power PoE
  • L2 wire-speed switching engine
  • 8K MAC forwarding address
  • Network redundant LACP, Spanning tree STP, RSTP & MSTP
  • Multicast/Broadcast/Flooding Storm Control
  • Wide operating temperature range (-40 to +75°C)
  • PSE power mgmt & PD power consumption monitoring
  • IP30 Protection
  • Din-rail and Wall mounting options
More Information
Product Name DRM1062 - Industrial 6+2 Port Managed PoE Gigabit Ethernet Switch
Product Dimension (D x W x H) 128mm x 77mm x 154mm
Copper RJ45 Ports
  • Ethernet Interface: 8 Gigabit Copper ports
  • Speed: 10/100/1000 Mbps
  • MDI/MDIX Auto-crossover: Support straight or cross wired cables
  • Auto-negotiating: 10/100/1000 Mbps speed auto-negotiation; Full and half duplex
  • Ethernet Isolation: 1500 VRMS 1 minute
SFP (pluggable) Ports
  • Fiber port types supported: 4 SFP (pluggable) Ports 100/1000BaseSFP slot; Support 100/1000BaseT SFP transceiver
  • Fiber port connector: LC typically for fiber (depends on module)
  • Optimal Fiber Cable: Typical 50 or 62.5/125 μm for multimode (mm); Typical 8 or 9/125 μm for single mode (sm)
  • Operating mode: Store and forward; L2 wire-speed/non-blocking switching engine
  • MAC addresses: 8K
  • Jumbo frames: 9K Bytes
Network Redundancy
  • Fast failover protection rings: Link loss recovery < 20ms; Single & Multiple rings; Ring coupling; Dual-homing; Chain
  • Spanning Tree Protocol: IEEE 802.1D STP; IEEE 802.1w RSTP; IEEE 802.1s MSTP
  • Port Trunk with LACP: Static trunk or Dynamic via LACP (Link Aggregation Control Protocol)
  • Port Security: IP and MAC-based Access control; IEEE 802.1x authentication Network Access Control Authentication via local database, RADIUS or TACACS+ AAA (Authentication, Accounting and Authorization)
  • Storm Control: Multicast/Broadcast/Flooding Storm Control
Bridge, Virtual Local Area Networks (VLANs) & Protocols
  • Flow control: IEEE 802.3x (Full Duplex) and Back-Pressure (Half Duplex)
  • Max VLANs: 1024
  • VLAN Types: Port-based VLANs; MAC-based VLANs; IP Subnet-based VLANs; Protocol-based VLANs; IEEE 802.1Q tag-based VLANs; RADIUS-assigned VLAN; IEEE 802.1ad Double Tagging (Q in Q)
  • Multicast protocols: IGMP v1, v2 with up to 255 multicast groups; IGMP snooping and querying; Immediate leave and leave proxy; Throttling and filtering
  • LLDP: IEEE 802.1ab Link layer Discovery Protocol (LLDP)
Traffic management engine & QoS
  • QoS: IEEE 802.1p QoS
  • Number of queues per port: 8
  • Scheduling schemes: SPQ, WRR
  • Traffic Shaper: Port-based shaping
  • RADIUS QoS: RADIUS-assigned QoS Class
  • User Management interfaces:  Cisco-like CLI (command line interface); WEB-based Management; SNMP v1, v2c & v3 Telnet (5 sessions)
  • Management Security: HTTPs, SSH; Radius Client for Management
  • Upgrade & Restore: FTP for Configuration Import/Export; FTP for Firmware Upgrade
  • Diagnostic: Syslog; Per VLAN mirroring; Ethernet Copper connection diagnostic tool SFP with DDM (Digital Diagnostic Monitoring)
  • MIBs: RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB; RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB
  • DHCP: Client, Server, Relay, Snooping
  • NTP/SNTP: Yes
  • System status: Device info/status; Ethernet port status; PoE Status
  • PoE Management: Scheduling; power control; PoE PD power consumption
  • Power input: Redundant Input Terminals
  • Reverse power protection: Yes
  • Input voltage range: 44-58 VDC (50~58V VDC for better PoE performance)
  • Max Power Output Power / Port: 30W (Max. 60W for port 1 & port 2)
  • PSE port output power mgmt: Scheduling; power control; PoE PD power consumption monitoring
  • Transient Protection: > 15,000 watts peak
  • Power Consumption: Max. 14W without PD connected; Max 265W with 240W PSE power delivered
  • Power Status indication: Indication of power input status
  • Ethernet port indication: Link & Speed
  • PoE Status: Indication of PoE Power applying
  • System Alarm: Profile-defined System Alarm
  • Alarm relay output: relay output with current carrying capacity of 0.5A @ 24 VDC
  • Alarm notification: Configurable alarm profile to enable Alarm LED, Alarm relay & SNMP traps
Environmental and Compliances
  • Operating temperature range: -40 to +75°C (cold startup at -40°C)
  • Storage temperature range: -40 to +85 °C
  • Humidity (non-condensing): 5 to 95% RH
  • Vibration, shock & freefall: IEC60068-2-6, -27, -32
  • Certification compliance: CE/FCC/UL-508;
  • Electrical safety: CSA C22, EN61010-1, CE
  • EMC: FCC Part 15, CISPR 22 (EN55022) Class A; IEC61000-4-2, -3, -4, -5, -6
  • RoHS and WEEE: RoHS (Pb free) and WEEE compliant
  • MTBF: > 25 years
  • Ingress protection: IP30
  • Installation option: DIN-Rail mounting, Wall mounting
Weight (Lbs) 3.1000
Copyright © 2021 PCWMICRO CANADA Inc ( DINRailSource.com ). All rights reserved.