| Product Name |
DRM1084 - Industrial 8+4 Port Managed PoE Gigabit Ethernet Switch |
| SKU |
DRM1084 |
| Product Dimension (D x W x H) |
128mm x 77mm x 154mm |
| Copper RJ45 Ports |
- Ethernet Interface: 8 Gigabit Copper ports
- Speed: 10/100/1000 Mbps
- MDI/MDIX Auto-crossover: Support straight or cross wired cables
- Auto-negotiating: 10/100/1000 Mbps speed auto-negotiation; Full and half duplex
- Ethernet Isolation: 1500 VRMS 1 minute
|
| SFP (pluggable) Ports |
- Fiber port types supported: 4 SFP (pluggable) Ports 100/1000BaseSFP slot; Support 100/1000BaseT SFP transceiver
- Fiber port connector: LC typically for fiber (depends on module)
- Optimal Fiber Cable: Typical 50 or 62.5/125 μm for multimode (mm); Typical 8 or 9/125 μm for single mode (sm)
|
| Ethernet |
- Operating mode: Store and forward; L2 wire-speed/non-blocking switching engine
- MAC addresses: 8K
- Jumbo frames: 9K Bytes
|
| Network Redundancy |
- Fast failover protection rings: Link loss recovery < 20ms; Single & Multiple rings; Ring coupling; Dual-homing; Chain
- Spanning Tree Protocol: IEEE 802.1D STP; IEEE 802.1w RSTP; IEEE 802.1s MSTP
- Port Trunk with LACP: Static trunk or Dynamic via LACP (Link Aggregation Control Protocol)
|
| Security |
- Port Security: IP and MAC-based Access control; IEEE 802.1x authentication Network Access Control Authentication via local database, RADIUS or TACACS+ AAA (Authentication, Accounting and Authorization)
- Storm Control: Multicast/Broadcast/Flooding Storm Control
|
| Bridge, Virtual Local Area Networks (VLANs) & Protocols |
- Flow control: IEEE 802.3x (Full Duplex) and Back-Pressure (Half Duplex)
- Max VLANs: 1024
- VLAN Types: Port-based VLANs; MAC-based VLANs; IP Subnet-based VLANs; Protocol-based VLANs; IEEE 802.1Q tag-based VLANs; RADIUS-assigned VLAN; IEEE 802.1ad Double Tagging (Q in Q)
- Multicast protocols: IGMP v1, v2 with up to 255 multicast groups; IGMP snooping and querying; Immediate leave and leave proxy; Throttling and filtering
- LLDP: IEEE 802.1ab Link layer Discovery Protocol (LLDP)
|
| Traffic management engine & QoS |
- QoS: IEEE 802.1p QoS
- Number of queues per port: 8
- Scheduling schemes: SPQ, WRR
- Traffic Shaper: Port-based shaping
- RADIUS QoS: RADIUS-assigned QoS Class
|
| Management |
- User Management interfaces: Cisco-like CLI (command line interface); WEB-based Management; SNMP v1, v2c & v3 Telnet (5 sessions)
- Management Security: HTTPs, SSH; Radius Client for Management
- Upgrade & Restore: FTP for Configuration Import/Export; FTP for Firmware Upgrade
- Diagnostic: Syslog; Per VLAN mirroring; Ethernet Copper connection diagnostic tool SFP with DDM (Digital Diagnostic Monitoring)
- MIBs: RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB ; RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB
- DHCP: Client, Server, Relay, Snooping
- NTP/SNTP: Yes
- System status: Device info/status; Ethernet port status; PoE Status
- PoE Management: Scheduling; power control; PoE PD power consumption
|
| Power |
- Power input: Redundant Input Terminals
- Reverse power protection: Yes
- Input voltage range: 44-58 VDC (50~58V VDC for better PoE performance)
- Max Power Output Power / Port: 30W (Max. 60W for port 1 & port 2)
- PSE port output power mgmt:Scheduling; power control; PoE PD power consumption monitoring
- Transient Protection: > 15,000 watts peak
- Power Consumption: Max. 14W without PD connected; Max 265W with 240W PSE power delivered
|
| Indicators |
- Power Status indication: Indication of power input status
- Ethernet port indication: Link & Speed
- PoE Status: Indication of PoE Power applying
- System Alarm: Profile-defined System Alarm
|
| Alarm |
- Alarm relay output: relay output with current carrying capacity of 0.5A @ 24 VDC
- Alarm notification: Configurable alarm profile to enable Alarm LED, Alarm relay & SNMP traps
|
| Environmental and Compliances |
- Operating temperature range: -40 to +75°C (cold startup at -40°C)
- Storage temperature range: -40 to +85 °C
- Humidity (non-condensing): 5 to 95% RH
- Vibration, shock & freefall: IEC60068-2-6, -27, -32
- Certification compliance: CE/FCC/UL-508
- Electrical safety: CSA C22, EN61010-1, CE
- EMC: FCC Part 15, CISPR 22 (EN55022) Class A; IEC61000-4-2, -3, -4, -5, -6
- RoHS and WEEE: RoHS (Pb free) and WEEE compliant
- MTBF: > 25 years
|
| Mechanical |
- Ingress protection: IP30
- Installation option: DIN-Rail mounting, Wall mounting
|
| Weight (Lbs) |
3.1000 |
